BBMDW - THICKENER & TEXTURIZER AS955
- MSDS: BBMDW
- Manufacturer: DUNCAN ENTERPRISES
- Product Name: THICKENER & TEXTURIZER AS955
- National Stock Number: 8010-00F002990
Product Identification
Product ID:THICKENER & TEXTURIZER AS955
MSDS Date:01/01/1992
FSC:8010
NIIN:00F002990
MSDS Number: BBMDW
Responsible Party
FRESNO, CA 93727-7819
US
Emergency Phone: 209-445-1222
Info Phone: 209-291-4444
Preparer: CURT SATHRE
Cage: 21546
Contractor
Telephone: 209-291-4444
Cage: 21546
Ingredients
NON-HAZARDOUS FOR INGREDIENTS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: ABRASIVE, CAN SCRATCH.
INHALATION: RESPIRATORY TRACT IRRITATION.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:EYES: FLUSH W/WATER AT LEAST 15 MINS. SKIN: WASH W/SOAP &
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:WATER SPRAY OR MULTI-PURPOSE DRY CHEMICAL
Fire Fighting Procedures:USE SCBA WHEN FIGHTING FIRES, ESPECIALLY IN
ENCLOSED SPACES.
Unusual Fire/Explosion Hazard:THE PRODUCT WILL BURNS & SUPPORT
COMBUSTION WHEN IGNITED. WHEN PRODUCT BURNS, WATER, CO2, CO, ACETIC
ACID & SMOKE ARE PRODUCED.
Accidental Release
Spill Release Procedures:CLEAN UP PROPERLY WITH PAPER TOWEL AND WET
SPONGE.
Handling
Handling and Storage Precautions:KEEP CONTAINER SEALED.
Other Precautions:DON'T INHALE MIST.
Exposure Controls
Respiratory Protection:IF SPRAYING, DON'T INHALE MIST. USE RESPIRATOR
THAT IS NIOSH APPROVED FOR SPRAYS & MISTS.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING.
Eye Protection:RECOMMENDED
Work Hygienic Practices:FOLLOW GOOD HYGIENE PRACTICES.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Spec Gravity:1.9
Solubility in Water:<5%
Appearance and Odor:WHITE POWDER
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:WATER, CO, CO2, ACETIC ACID, SMOKE
Disposal
Waste Disposal Methods:PUT PAPER TOWELS IN TRASH AND RINSE OUT SPONGE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.